The XFX Radeon RX 470 RS Black Edition Review

Spread the love

Page 2 : XFX Radeon RX 470 RS Black Edition Up Close, Ghost 4.0 Cooler

The XFX Radeon RX 470 RS Black Edition Up Close

The XFX Radeon RX 470 RS Black Edition is a large card – the same size as the AMD Radeon RX 480. The shroud of the XFX Ghost 4.0 cooler extends a little over the card itself, to accommodate the two large 85mm fans. The back is protected and stiffened by a solid aluminium backplate, which also serves as a secondary heatsink.

  • XFX Radeon RX 470 RS Black Edition
  • XFX Radeon RX 470 RS Black Edition
  • XFX Radeon RX 470 RS Black Edition
  • XFX Radeon RX 470 RS Black Edition
  • XFX Radeon RX 470 RS Black Edition
  • XFX Radeon RX 470 RS Black Edition

The XFX logo is etched into the backplate, with a white XFX logo on the top of the shroud. However, case modders should note that it does not have any LED lighting – the XFX logo will not light up when the card is powered up. The third XFX logo can be found as part of the exhaust vent, next to the DVI port.

[adrotate banner=”5″]

 

The XFX Ghost 4.0 Cooler

The XFX Ghost 4.0 cooler is, arguably, the highlight of this model. It features a unibody heatsink, with composite heatpipes. The unibody design improves its ability to cool the VRM and GDDR5 memory modules by 40%, while reducing fan noise by 5%.

XFX Radeon RX 470 RS Black Edition heatsink

The composite heatpipe design, on the other hand, combines the liquid and capillary action heatpipe in a single pipe. This increases the total heatpipe surface area by 30%, which greatly improves its ability to quickly transfer heat.

  • XFX Radeon RX 470 RS Black Edition heatsink
  • XFX Radeon RX 470 RS Black Edition heatpipe

The other cool thing about the XFX Ghost 4.0 cooler are its two 85 mm fans, pun intended. With a power output of 4.2 W, two of these FirstD FDC10H12S9-C fans can push a considerable amount of air through the heatsink. But what’s really cool are its patented hard-swap design, and its load-sensing technology.

XFX Radeon RX 470 RS Black Edition fan

The hard swap design allows for easy detachment and installation of the two fans. They are locked in place by just two clips. You can swap them out for more powerful fans, or even fans with LED lights. It also allows you to easily remove them to clean the blades or even the heatsink fins underneath. Very useful!

The other cool feature is the fans’ auto load-sensing capability. They will automatically adjust their speed according to the workload. During light loads (watching videos, using office applications), the XFX Radeon RX 470 RS Black Edition runs cool enough that both fans do not spin at all, giving you absolute silence. But when you start gaming, the fans start up and increase their speed to meet the demand automatically.

Next Page > Benchmarking Notes, Cooling Performance, Noise Level

 

Support Tech ARP!

If you like our work, you can help support our work by visiting our sponsors, participate in the Tech ARP Forums, or even donate to our fund. Any help you can render is greatly appreciated!

About The Author

3 Comments

  1. Pingback: Daily Roundup: 2016-10-22 - Bjorn3D.com

  2. Pingback: The GeForce GTX 1050 & 1050 Ti Performance Comparison - Tech ARP

  3. Pingback: The AMD Radeon RX 500 Series Tech Report - Tech ARP

Leave a Reply