NXP iMX 8M Plus To Use Kingston eMMC Memory!

Kingston just announced that their eMMC memory has been selected to be used in the NXP iMX 8M Plus reference board!

 

NXP iMX 8M Plus To Use Kingston eMMC Memory!

On 8 April 2021, Kingston Technology announced that their eMMC embedded memory will be featured in NXP iMX 8M Plus evaluation kits.

Although Kingston did not reveal which eMMC part was selected, the picture they released appears to show the EMMC08G-MB29, which boasts these key features :

  • 8 GB capacity
  • 3D TLC in pMLC NAND memory
  • eMMC 5.1 standard
  • 11.5 x 13 x 0.8 mm package size

They will be used as storage in the NXP iMX 8M Plus reference boards, which will be used for development and engineering verification.

 

NXP iMX 8M Plus : What Is It?

The NXP iMX 8M Plus is an application processor – a System-On-a-Chip (SoC) designed for infrastructure solutions like smart home, intelligent city and industrial IoT devices.

  • two or four ARM Cortex-A53 processors (up to 1.8 GHz)
  • a neural processing unit (NPU) operating at up to 2.3 TOPS
  • ARM Cortex-M7 controller (up to 800 MHz)
  • 32-bit DDR4 and LPDDR4 interface (up to 4.0 GT/s)
  • dual image signal processors (ISP) : up to 12 MP, up to 375 MPixels per second
  • two MIPI CSI camera interfaces
  • two Gigabit Ethernet LAN interfaces
  • two USB 3.0 / 2.0 with Type C PHY
  • PCI Express Gen 3 support
  • 14 nm FinFET process

 

Recommended Reading

Go Back To > Computer | BusinessTech ARP

 

Support Tech ARP!

If you like our work, you can help support us by visiting our sponsors, participating in the Tech ARP Forums, or even donating to our fund. Any help you can render is greatly appreciated!

Leave a Reply