MPS Control Version For OS from The Tech ARP BIOS Guide

MPS Control Version For OS from The Tech ARP BIOS Guide

MPS Control Version For OS

Common Options : 1.1, 1.4

 

Quick Review of MPS Control Version For OS

The MPS Control Version For OS feature is only applicable to multiprocessor motherboards as it specifies the version of the Multi-Processor Specification (MPS) that the motherboard will use. The MPS is a specification by which PC manufacturers design and build Intel architecture systems with two or more processors.

MPS 1.1 was the original specification. MPS version 1.4 adds extended configuration tables for improved support of multiple PCI bus configurations and greater expandability in the future. In addition, MPS 1.4 introduces support for a secondary PCI bus without requiring a PCI bridge.

If your operating system comes with support for MPS 1.4, you should change the setting from the default of 1.1 to 1.4. You also need to enable MPS 1.4 support if you need to make use of the secondary PCI bus on a motherboard that doesn’t come with a PCI bridge.

You should only leave it as 1.1 only if you are running an older operating system that only supports MPS 1.1.

Microsoft Windows NT onwards already supports MPS 1.4. Therefore, all newer operating systems like Windows 2000 and Windows XP and beyond have no problem supporting MPS 1.4.

However, users of the ABIT BP6 motherboard and Windows 2000 should take note of a possible problem with the MPS version set to 1.4. Dan Isaacs reported that when you set the MPS version to 1.4 in the ABIT BP6, Windows 2000 will not use the second processor. So, if you encounter this problem, set the MPS Version Control For OS to 1.1.

 

Details of MPS Control Version For OS

The MPS Control Version For OS feature is only applicable to multiprocessor motherboards as it specifies the version of the Multi-Processor Specification (MPS) that the motherboard will use. The MPS is a specification by which PC manufacturers design and build Intel architecture systems with two or more processors.

MPS 1.1 was the original specification. MPS version 1.4 adds extended configuration tables for improved support of multiple PCI bus configurations and greater expandability in the future. In addition, MPS 1.4 introduces support for a secondary PCI bus without requiring a PCI bridge.

Please note that MPS version 1.4 is required for a motherboard to support a secondary PCI bus without the need for a PCI bridge.

If your operating system comes with support for MPS 1.4, you should change the setting from the default of 1.1 to 1.4. You also need to enable MPS 1.4 support if you need to make use of the secondary PCI bus on a motherboard that doesn’t come with a PCI bridge. This is because only MPS 1.4 supports a bridgeless secondary PCI bus.

You should only leave it as 1.1 only if you are running an older operating system that only supports MPS 1.1.

Microsoft Windows NT onwards already supports MPS 1.4. Therefore, all newer operating systems like Windows 2000 and Windows XP and beyond have no problem supporting MPS 1.4.

However, users of the ABIT BP6 motherboard and Windows 2000 should take note of a possible problem with the MPS version set to 1.4. Dan Isaacs reported that when you set the MPS version to 1.4 in the ABIT BP6, Windows 2000 will not use the second processor. So, if you encounter this problem, set the MPS Version Control For OS to 1.1.

Go Back To > The Tech ARP BIOS Guide | Home

 

Support Tech ARP!

If you like our work, you can help support our work by visiting our sponsors, participating in the Tech ARP Forums, or even donating to our fund. Any help you can render is greatly appreciated!


Comments

comments

About The Author

Related posts

Leave a Reply

%d bloggers like this: