Buy the ARP T-Shirt! BIOS Optimization Guide Money Savers!
 
   
The Tech ARP 2014 Mega Giveaway Contest (Week 10)
We have been working hard to arrange a ton of prizes, which we will give away every w... Read here
Desktop Graphics Card Comparison Guide Rev. 29.0
Covering 588 desktop graphics cards, this comprehensive comparison allows you ... Read here
   
   
Buy The BOG Book Subscribe To The BOG! Latest Money Savers!

DRAM Read Latch Delay

Common Options : Enabled, Disabled

Quick Review

This BIOS feature is similar to the Delay DRAM Read Latch BIOS feature. It fine-tunes the DRAM timing parameters to adjust for different DRAM loadings.

The DRAM load changes with the number as well as the type of memory modules installed. DRAM loading increases as the number of memory modules increases. It also increases if you use double-sided modules instead of single-sided ones. In short, the more DRAM devices you use, the greater the DRAM loading.

With heavier DRAM loads, you may need to delay the moment when the memory controller latches onto the DRAM device during reads. Otherwise, the memory controller may fail to latch properly onto the desired DRAM device and read from it.

The Auto option allows the BIOS to select the optimal amount of delay from values preset by the manufacturer.

The No Delay option forces the memory controller to latch onto the DRAM device without delay, even if the BIOS presets indicate that a delay is required.

The three timing options (0.5ns, 1.0ns and 1.5ns) give you manual control of the read latch delay.

Normally, you should let the BIOS select the optimal amount of delay from values preset by the manufacturer (using the Auto option). But if you notice that your system has become unstable upon installation of additional memory modules, you should try setting the DRAM read latch delay yourself.

The amount of delay should just be enough to allow the memory controller to latch onto the DRAM device in your particular situation. Don't unnecessarily increase the delay. Start with 0.5ns and work your way up until your system stabilizes.

If you have a light DRAM load, you can ensure optimal performance by manually using the No Delay option. If your system becomes unstable after using the No Delay option, simply revert back to the default value of Auto so that the BIOS can adjust the read latch delay to suit the DRAM load.

 

Support Tech ARP!

If you like our work, you can help support out work by visiting our sponsors, participate in the Tech ARP Forums, or even donate to our fund. Any help you can render is greatly appreciated!


If you like to know more about this and other BIOS settings, why not subscribe to the full BIOS Optimization Guide?
Click here to find out how you can do that now!


Links: Discuss BIOS options here in our forums | Back to the list of BIOS options

 
 


Copyright © Tech ARP.com. All rights reserved.