The ADATA SU800 M.2 2280 SSD Launched

Taipei, 3 November 2016ADATA Technology today launched the M.2 2280 version of the ADATA SU800 3D NAND SSD. With higher density, faster performance, and longer lifespan than 2D NAND SSDs, the new SU800 SSD fits on a compact card while still available in 128GB, 256GB, 512GB, and 1TB and offered at very attractive price points.

It supports a DRAM Buffer and SLC Caching mode to boost performance up to 560MB/s read and 520MB/s write, with LDPC error correction, Data Shaping, and a RAID Engine to bolster data integrity. For users that want a simple, cable-free, and low energy draw SSD upgrade, the ADATA SU800 M.2 2280 has much to offer.

ADATA SU800 M.2 2280 SSD Launched

The ADATA SU800 M.2 2280 SSD

Denser, faster, and longer-lasting SSD with a smaller footprint

The ADATA SU800 M.2 2280 fits on a compact PCB and slots directly into M.2 ports, which are increasingly common on desktop PCs and the standard on notebooks. It uses 3D NAND with an SMI controller and fits up to 1TB. Unlike 2.5” SSDs, it does not require cables and only needs very minimal power, supplied straight from the motherboard.

The direct motherboard link also helps reduce latency and increase performance by roughly 10% compared to 2.5” SATA 6Gb/s drives. The SU800 M.2 2280 reaches 560MB/s read and 520MB/s write. It also lasts longer than 2D NAND drives, with an MTBF (mean time between failures) of 2,000,000 hours versus 1,500,000.

Packed with performance-enhancing and data integrity-ensuring features

The ADATA SU800 M.2 2280 integrates a DRAM Cache for speed acceleration on demand, complemented by SLC Caching mode (single-level cell performance). For data integrity and safety, LDPC (low density parity check) error correction, RAID Engine, and Data Shaping are deployed, the latter helping even out read/write cycle loads to prolong SSD lifespan.

Extremely power efficient – and easy on batteries

Like all M.2 cards, the ADATA SU800 needs very little power to operate. It helps extend battery life on notebooks and reduces overall system power requirements for users building a desktop PC. The drive uses DEVSLP (Device Sleep) technology to go into a dormant, extra low-power state when idle to reduce energy consumption even further.

An immediately obvious upgrade

For users moving from 3.5” and 2.5” mechanical drives, the ADATA SU800 M.2 2280 offers a striking increase in performance combined with a massive reduction in drive size, noise, heat, and energy draw. Even for SATA 6Gb/s SSD users, it presents a much simpler, neater, and more reliable SSD solution that is well worth considering.

Like other ADATA SSDs, the ADATA SU800 M.2 2280 includes licenses for SSD Toolbox drive management and Migration Utility data migration apps.

 

Support Tech ARP!

If you like our work, you can help support our work by visiting our sponsors, participating in the Tech ARP Forums, or even donating to our fund. Any help you can render is greatly appreciated!

Comments

comments

About The Author

Related posts

Leave a Reply

%d bloggers like this: